GALEP-5D can program all devices (EPROM, Flash, PLD, EPLD, GAL, PALCE, PIC, MCU etc.) with up to 240 pins. More than 64,000 devices are currently supported (GALEP-5D device list). Additionally, GALEP's JTAG player can program SVF/JAM data into all existing and future devices that have a JTAG port.
GALEP-5D is packed into an extremely rigid, but lightweight single-block milled-aluminium case. The wallet-sized unit weighs only 750g / 1.65 lbs.
GALEP-5D is uncompromisingly designed for speed, offering the highest performance of all programmers on the market today. An internal 200 MIPS ARM-9 processor under Embedded Linux handles communication and programming. Up to 4 FPGA (user-programmable logic) devices control the 240 pin drivers and support hardware acceleration of the programming algorithms through state machines and UARTs.
A MB91F467 Microcontroller by Fujitsu (8 MBit) needs only 19 seconds for a serial program/verify cycle; 256 MBit NOR Flash (28F256P30) is programmed and verified in 170 seconds. The internal 128 MByte RAM serves as data storage and allows to transfer the data only once for programming multiple devices.
240 universal pin drivers
A universal pin driver concept with as many pins as possible reduces the number of required adapters and thus minimizes the overall costs of the programming system. GALEP's custom-designed universal pin
driver IC guarantees optimal
signal quality at the output pins, and allows the small size and low power consumption of all GALEP programmers. Each of the
240 pins can generate the following signals:
- Logical high between 1.2V .. 5.0V
- Logical input, threshold 0.5V … 5.0V
- Three programming voltages between 1.3V .. 25.0V
- Three switchable resistors for pullup and pulldown
- Adjustable clock rate
regulators for the programming voltages are controlled by D/A converters
in 100 mV steps. Further D/A converters control the
logic levels and the input threshold.
For maximum protection of the programmable device, all voltages are permanently monitored by an independent circuit.
GALEP-5D Gang Programming Cascade
Stand alone, Gang and Network operation
Through its Ethernet connector, GALEP-5D can be accessed from any PC in the network. An arbitrary number of GALEPs can be combined to a Gang programmer. Different modes of operation are supported:
Normal programming mode. Connect GALEP through USB2 or Ethernet to your PC, and run the Galep5 or the new GalepX software.
Script remote control mode. Control all GalepX operations - device selection, file loading, buffer operations, programming - completely from your production software or from batch files with script commands in a C-based language.
Server based stand alone mode.* In this mode, GALEP's setup and programming data is stored on a PC in the LAN. For programming just connect GALEP to the LAN, insert the device and press the start button.
* Avaliable with a future software update.
In System Programming
for in-system programming (ISP) can be taken from a separately
available ISP adapter or directly from the 48-pin ZIF socket.
The help system provides information about the wiring of the
target system for all supported components. With the multiboard adapter, GALEP-5D can connect up to 32 MCU boards and program them simultaneously!
The software runs under Windows 95, 98, ME, NT4, 2000, XP, Vista, 7, 8, 10, and Linux.
Besides basic functions such as erase, read,
program and compare, split and shuffle, it features easy-to-use configuration
options for any special functions required by the selected device.
The software supports all common file formats, such as binary, Hex, JEDEC, and JTAG. Mass production is supported
by providing statistics functions and serial number generation.
The software is permanently improved for supporting new components (device list). Free updates are available on our website in weekly intervals.
Delete, program and verify all devices with JTAG interface (Joint Test Action Group, IEEE Std. 1149.1), even when they are not yet included in the device list. GALEP's universal JTAG player supports files in SVF/XSVF (Xilinx) format or in JAM byte code player format (ALTERA).
Debug all Microcontrollers with JTAG interface that are supported by the included OpenOCD (On Chip Debugger) software - ARM7, ARM9, XScale, and Cortex-M3 MCUs. The chip to debug is simply put into GALEP's programming socket or connected with GALEP through a cable or ISP adapter.
Define test algorithms for in circuit testing of complete circuit boards (Boundary Scan) for small series production. This way your GALEP-5D becomes a complete development, test and production system!
to each function, GALEP checks the power consumption, correct
positioning, and the contacts of all pins of the selected component.
This prevents accidental damage to the component or the device.
Modules and AdapterS
A main advantage of GALEP-5D is the innovative module concept. In seconds the DIL module can be replaced with a different socket module. Due to the high pin count, only a single module is required for all programmable devices with that socket. For instance, a single QFP-120 module replaces about 30(!) specialized QFP-120 adapters required by competitor products. When programming high pin devices, a GALEP-5D-240 has quickly paid off.
comes with a DIL-48 module for all components in DIL
sockets of up to 48 Pins. All existing GALEP-4 and GALEP-5
adapters can be used with the DIL-48 module of GALEP-5D. Universal modules and adapters for the following sockets up to 120 pins are available: SOIC, SOP, TSOP, SSOP, TSSOP, PLCC, QFP, TQFP, MLF.
Socket modules are optionally available with a self-opening mechanism (see image). The socket automatically closes when the device is inserted, and opens it for removal. This makes mass programming a lot easier, either manually or as part of a production line.
Direct Access Module & SDK
A special module with 240 pin connectors allows direct access to any pin with a data transfer speed of up to 6 MB/sec per pin. This way, any hardware interface or test equipment can be built with GALEP. The Direct Access Module comes with a SDK and development environment for Linux.
GALEP-5D Technical Specifications
ca. 118x172x22mm (+7mm socket)
ca. 750 g, single block aluminium case
with 48-pin ZIF
Up to 240
universal pin drivers
Front start button for production mode
low-voltage components down to 1.3V
2.0 high-speed port, plus Ethernet
card slot for special purposes
128 MB internal data RAM
ARM-9 RISC processor, 8 MB Flash
Hardware acceleration through 4 FPGAs
(50K gates, 64Kb RAM)
linear voltage regulators for internal power supply
switching regulators for programming voltages
linear voltage regulators for logic levels and input threshold
for internal voltage monitoring
D/A converter, 16-channel A/D converter
& Mini USB cables
manual and software
2000 / XP / Vista / Win 7 / Win 8 / Win 10 / Linux
or USB 2.0 port, or Ethernet port